The Banking e-Teller system allows bank customers to perform ATM transactions from their cell phone. BeT will allow customers to check balances, make remote capture deposits, and perform balance transfers to their checking or savings account. Balance transfers should only be processed if the funds are available. It is time to start organizing your solution for this system and to begin development on your design proposal.
 

Create the following for BeT:
 

•Flowcharts showing the program processing flow for remote capture deposits, balance transfers, and balance inquiries

Phase 1

Usability Tests – design a usability test to conduct usability testing on a device or equipment used on daily basis.

The device can be any kind of interface device. Pick a specific device to evaluate and design a usability test for this device.

Reference Chapter 5 Evaluation and the User Experience for assistance in designing the test.  Design your test to accommodate the Eight Golden Rules of Interface Design from section 3.3.4. Explain how your test will evaluate the user experience in regard to the Eight Golden Rules.

There should be 5 -7 pages in the body of paper with a minimum of 10 references.  7th Edition APA formatting required with appropriate headings, title page, table of contents, abstract, body and references.

—————————————————————————————————————–

Phase 2

Project Phase 2: Usability Tests – Status Report.  Conduct a session with the device using your test created in Phase 1.  Report on the results of the test.

To complete this assignment:

1.- Download the file containing the instruction and requirements for this project. (the attachment – Document 10) 

2.- Download the consent template.

3.- Select a device to be tested/evaluated. (see the sample list and choose one device)

4.- Follow the steps outlined in Document 10. 

The group should use at least 2 to  4-individual to test the product  (friend or relative to conduct the test but be sure to use an adult in your testing and follow the informed consent guidelines for human research).  The informed consent form is attached and should be uploaded along with your paper.

There should be 15  pages in the body of the paper with a minimum of 10 references.  7th Edition APA formatting required with appropriate headings, title page, table of contents, abstract, body, and references.

NOTE: In the second phase of this project, the group will be submitting:

1. – The structure of the paper with all the section (The tile of each section)

2. – Deliverables Phase 2: The paper will include: The Title Page, The Abstract, The Introduction, The selected device to be evaluated, The 10-references from Peer-Reviewed Journal. The selected participants (Include “only” the code to each participant).

3. – Signed consent form from each participant

NOTE 2: The final project will be completed in Week 13.

Instruction:

• To complete this assignment, the following must be observed.

1. – Use only Peer-reviewed journals to research the above questions. (When Applicable)

2. – Adhere and apply properly the Basic Citation Styles of the APA (Use as a reference the APA Manual.).

3. – If you use another author’s ideas, concepts, and words, you need to cite the source and give credit to the author. Not citing in-text the source will be considered plagiarism, and you will receive zero (0) for your assignment.

4. – Do not copy and paste information from the Internet. (You will receive zero (0) for your Assignment).

5. – Late submission will not be accepted.

6. – This is a single submission. Late assignments will not be accepted. Check your work before submitting it. 

7. – Use the Sample – APA – Paper provided as a guide to submit your assignment ( ” Check for grammatical errors”) .

 7.1.- Observe the Paper Structure and Formatting.

7.2.- Make sure you observe “The Title Page and Structure.”

7.3.- References list must be per APA.

7.4.- Fill in the Certificate of Authorship located at the end of the paper.

Phase 3 – FINAL PAPER and PPT

Usability Tests and Final Report:  Must include:  APA Formatted Paper and  12-slides of Power Point Presentation. 

Phase 3 will include Phase 1 and Phase 2 in a combined single paper. 

Total paper 15 to 20 pages in the body of the paper with 30 references total.  This includes the 5 to 7 pages and 10 references each from Phase 1 and Phase 2.  (Phase 3 will have 5 to 7 pages with 10 references) 7th Edition APA formatting required with appropriate headings, title page, table of contents, abstract, body and references. 

*Below is the instructions, and I have attached an SAMPLE EXAMPLE document 

Legal Abstracts – Instructions

A sample legal abstract is posted in Blackboard. Use the sample as your template.

Make sure that your case or controversy is current — within the last 6 months — because older cases or controversies are often misleading or not relevant because of subsequent legal developments. Cases can be overturned; statutes or regulations can be amended or repealed. 

The abstract is a summary of the author’s article in the words of the student. Abstracts submitted containing the original article’s text in full or part will not receive full credit. Your abstract should reflect a summary in your own words of the material in the article you are discussing.

Abstract topics should address current legal issues, controversies, cases or developments affecting cybersecurity law as we examine it in this course. For further guidance on topics, consider the subjects covered in each of the class modules. Articles may be chosen from technical journals or websites, legal journals or websites, or general news or information sites. 

To restate, the timeliness of your selected case, controversy or issue is crucial, because an article about a case that has subsequently been overturned or a law that has been amended or repealed not only does not keep you properly informed on current legal issues, it may actually provide incorrect information that can negatively impact your decision making when analyzing potential legal issues. 

Each abstract must contain the following headings:

Article title

Author

Publication

Publication date

URL

Facts of the dispute

The background of the case or controversy.

Plaintiff’s claim

In a criminal case, the Plaintiff is the State or the appropriate governmental entity. What legal wrong does the plaintiff claim that the defendant committed?

Defendant’s claim

How has the defendant answered? In the early stages of litigation, the defendant may not have answered the complaint. 

Applicable law (i.e. statute, regulation, treaty)

Usually, the applicable law is mentioned in the article. If not, try to determine which law or laws apply. 

Issue of law

This is the legal question that is the foundation of the case. Courts rule on an issue of law by interpreting the law as applied to the facts of the case. 

Holding (if an adjudicatory body has rendered a decision)

This is the ruling that a court issues after it applies the law to the facts of the case. If a case is still ongoing, the court may not have issued a holding. 

Impact on IT

Finally, include your evaluation of the possible impact on cybersecurity in the enterprise of the particular legal issues in the article under the following heading. Here is where you get to apply your knowledge and skills as an IT professional. If you can find additional commentary on the case or controversy discussed, include it here. 

please see instructions in attachment.

for point 2:  -discuss, based upon your personality and work preferences, what you see as the pros and cons of each occupation. 

my field of study is cyber security. so in this point just look for some work preferences of people who do cyber security on google please

I need help with Cryptography assignment. 

Exp19_Word_Ch02_ML2 – Dentist 1.1

Exp19 Word Ch02 ML2  Dentist 1.1

Word Chapter 2 Mid-Level 2 – Dentistry 

Project Description:

In the following project, you will use Word to prepare a letter promoting an informational session for a pediatric dentist. You will insert a picture and use text and paragraph formatting to improve the appearance of the letter.

Start Word. Download   and open the file named Exp19_Word_Ch02_ML2_Dentist.docx.   Grader has automatically added your last name to the beginning of the   filename. Ensure that nonprinting characters are displayed.

Change the   capitalization of the recipient, ms.   nancy lancaster, and her address to Capitalize Each Word, and change the   capitalization of the state abbreviation to UPPERCASE. Also capitalize her   first name in the salutation. Change the name Dr. Lockwood on the last line of the letter to Mia   Grant. Type   [email protected] on a new line below Mia Grant. (Do not press ENTER after   typing the email address.)

Change the alignment   of body paragraphs beginning with On   behalf and ending with seeing you   on September 11 to Justify.

Apply a right arrow   bullet to the paragraph mark under the first body paragraph. Type the   following items, pressing ENTER after each of the first three   lines. Do not press ENTER after the last item in the list.
 

Finding hidden toothbrushes in the dental office
Participating in the dental crossword puzzle challenge
Writing a convincing letter to the tooth fairy
Digging through the dental treasure chest

Change the paragraph   spacing of the text from the salutation Dear   Nancy through the last paragraph that ends seeing you on September 11 to 12 pt Spacing After. Remove the   paragraph mark just after the Dear   Nancy paragraph.

Change the font of Dr. Lockwood Pediatric Dentistry Office in   the first body paragraph to small caps.

Select the lines of   text beginning with Date: and   ending with Richmond, VA 23005.   Increase the left and right indents to 1.25 and change paragraph   spacing to 0 pt Spacing After. Do not deselect the text.

To the same   selection, apply a Box border, selecting a double line   (seventh in the list), with a line width of 3/4 pt.

Delete the extra tab   formatting marks to the left of the lines containing September 4, 2021; 4:00 p.m.; and Dr. Lockwood   Pediatric Dentistry Office to align them with other text in the bordered   area. 

Delete the paragraph   mark before the paragraph that begins Please   call our office.

Change the paragraph   spacing of the paragraph containing Funville,   VA 23000 to 6 pt Spacing After. Change the paragraph spacing of the line   containing Sincerely to 6 pt   Spacing Before. Add paragraph spacing of 6 pt Spacing Before to the paragraph   beginning Dr. Lockwood is pleased to   let you know.

Change the font of   the entire document to Bookman Old Style. Change the font size of the entire   document to 12 pt.

With the insertion   point at the beginning of the document, insert an Online Picture using the   keyword tooth and then insert an appropriate image from the   results. Select and delete any additional text boxes that may display when   the image is inserted. To avoid file size limitations, compress the online   picture once it is inserted.
 
  Position the picture in the top-right corner of the document, just below the   header area. Change the wrapping style to Square. Change the height to 1.1”.   Apply a picture style of Beveled Oval, Black and choose the Chalk Sketch   Artistic Effect.

At the end of the   document, insert a Next Page section break. In Section 2, change the   orientation to Landscape, the paragraph spacing to 6 pt Spacing After, and   the font size to 14.

In Section 2, center   the first paragraph. Type Wellington Water Park & Slide Fun Day! Press ENTER and type September   11, 2021.   Press ENTER and change the alignment to Left. Change the font size to 12.

Set a left tab stop   at 2” and a right tab stop at 7”. The right tab stop should include a dot   leader. Type the following text, with the first column at the 2” tab stop and   the next column at the 7” tab stop.
 

Check-in 9:00
Wave pool 9:30-11:00
Lunch at the pavilion 11:00-12:00
Bungee 12:00-2:00
Water slide 2:00-3:00
Parent pickup at the gate 3:00-3:30

Format the text Wellington Water Park & Slide Fun Day!   on page 2 as a WordArt with the style Gradient Fill: Purple, Accent color 4;   Outline: Purple, Accent 4 (second row, third column). Change the wrapping   style to Top and Bottom, and the font size of the WordArt object to 24. Drag   to center the object horizontally on the first line.

No material for   public distribution should contain errors. You check for and correct any   spelling and grammar mistakes because it speaks to professionalism and   influences how patients perceive Dr. Lockwood and his staff in the dentist’s   office. Ignore the suggestions for Funville   and include, and any other   suggestions on your computer. 

Save and close Exp19_Word_Ch02_ML2_Dentist.docx. Exit   Word. Submit the file as directed.

Final Project Outline Assignment Instructions

Overview

In order to begin the Final Project Outline, a wireless telecommunications technology must be selected that you are familiar with. 

Instructions

The objective of the Final Project Outline is to identify a 

Thesis Statement (or to investigate current problems in the field of wireless security).

It is recommended that the selected topic is familiar to you. The subject must also fall within the scope of the course. 

The topic proposal must consist of a written report which must be at a minimum of 5 pages. It must include a Statement of Technology that has been selected, as well as an outline of the project and the anticipated outcomes of the project. 

Note: Your assignment will be checked for originality via the Turnitin plagiarism tool.

1. Introduction – 1 page

2. Thesis Statement – a current problem in the field of wireless security . 2 pages

3. Statement of Technology – scope of the approach of research effort. 2 pages

4. Outline of the Project – Project Outcomes / anticipated outcomes of the project 5 pages

5. Conclusion – 1 page

6. References – 7 

Exp22_Excel_Ch06_Cumulative – AutoSales 1.1

Exp22 Excel Ch06 Cumulative AutoSales 1.1

Excel Chapter 6 Cumulative – AutoSales

Project Description:

You are the finance manager for Grossman Auto Sales. Your company offers in-house financing and as part of your duties you create reports detailing purchase options. You want to create a report to determine the optimal purchase price of a vehicle based on your customer’s budget. You also want to create one- and two-variable data tables to provide detailed payment options based on varying interest rates and down payments.

Download and open the file named   Exp19_Excel_Ch06_Cumulative_AutoSales.xlsx.   Grader has automatically added your last name to the beginning of the   filename.

Create appropriate range names   for Purchase Price (cell C5), Sales Tax (cell C6), Down Payment (cell C7),   Months Financed (C8), APR (cell C9), Down Payment Amount (cell C12), Amount   Financed (cell C13), and Tax Owed   (cell C14). Create the range names using the Create from Selection method,   using the values in the left column. 

Edit the existing name range   Tax_Owed to display as Tax. Note, Mac users, in the Define Name dialog box, add the new   named range, and delete the original one.

Apply the range names to the   existing formulas and functions in the worksheet.

Create a new worksheet labeled Range Names, paste the newly created range   name information in cell A1, and then resize the columns as needed for proper   display.

Use Goal Seek to determine the   optimal purchase price to reach a $500 monthly payment with all other variables remaining   unchanged. 

Start in cell E5. Complete the   series of substitution values ranging from $20,000 to $75,000 at increments   of $5,000 vertically down column E. Apply Comma Style format to the range   E5:E16 with two decimal points and preserve the thick bottom border on row   16.

Enter references to the Down   Payment Amount, Tax Owed, and Monthly Payment (Cells F4, G4, and H4) in the   correct location for a one-variable data table. Use range names where   indicated. 

Complete the one-variable data   table and format the results with Comma Style with no decimal places. 

Apply Custom number formats to   cell F4:H4 that displays the text Down Payment in cell F4, Tax in G4, and Monthly Pmt in cell H4. Bold and center the   headings and substitution values.

Copy the purchase price   substitution values from the one-variable data table and paste the values   starting in cell J5. Adjust the width of column J as needed.

Type 5000 in cell K4. Complete the series of substitution   values from $5,000 to $15,000 at $5,000 increments. Apply Accounting Number   Format to the range K4:M4.

Enter the reference to the   Monthly Payment function in the correct location for a two-variable data   table.

Complete the two-variable data   table and apply Comma Style to the range K5:M16 with no decimal places.

Apply a Custom number format to   make the formula reference display as the descriptive column heading Purchase   Price. Bold the   headings in cells J4:M4.

Create a scenario named Best Case, using Purchase Price and   Months Financed. Enter these values for the scenario: 40000, and 36.

Create a second scenario named Worst Case, using the same changing cells.   Enter these values for the scenario: 50000, and 72.

Create a third scenario named Most Likely, using the same changing cells.   Enter these values for the ­scenario: 45000, and 60.

Generate a Scenario Summary report   based on Monthly Payment. Be sure to use best practice in formatting the   report by deleting Column A:B, Row 1, and the Current Values column.

Load the Solver add-in if it is   not already loaded. Set the objective to calculate a Monthly Payment of $500.

Use Purchase Price and Months   Financed as changing variable cells.

Set constraints to ensure the   Purchase Price is less than or equal to $50,000, greater than or equal to $30,000, and a whole number. 

Set constraints to ensure months   financed are less than or equal to 72, greater than or equal to 24, and a whole number.

Solve the problem and save the   results. Generate the Answer Report. If you get an internal memory error   message, remove Solver as an add-in, close the workbook, open the workbook,   add Solver in again, and finish using Solver.

Save and close Exp22_Excel_Ch06_Cum_AutoSales.xlsx.   Exit Excel. Submit the file as directed.

Find a peer-reviewed scholarly journal article discussing electronic innovation and the government. Complete a review of the article by writing a 2-3 page overview of the article. This will be a detailed summary of the journal article, including concepts discussed and findings. Additionally, find one other source (it does not have to be a peer-reviewed journal article) that substantiates the findings in the article you are reviewing. 
Once you find the article, you will read it and write a review of it.  This is considered a research article review.
Your paper should meet these requirements:

• Be approximately three to four pages in length, not including the required cover page and reference page.
• Follow APA 7 guidelines. Your paper should include an introduction, a body with fully developed content, and a conclusion.

 Define stubs for the methods called by the below main(). Each stub should print “FIXME: Finish methodName()” followed by a newline, and should return -1 .  Example output:  

FIXME: Finish getUserNum()



FIXME: Finish getUserNum()



FIXME: Finish computeAvg()



Avg: -1

import java.util.Scanner;

public class MthdStubsStatistics {

   /*Your Answer Goes Here*/

   public static void main(String [] args) {

      int userNum1;

      int userNum2;

      int avgResult;

      userNum1 = getUserNum();

      userNum2 = getUserNum();

      avgResult = computeAvg(userNum1, userNum2);

      System.out.println(“Avg: ” + avgResult);

   }

}