Discussion 300 words

 

Read the section in this week’s reading assignment on secure passwords.

Then pick and three passwords: one not secure, one acceptable, and one very secure. Then write a brief description of the passwords you have chosen, indicating why they are secure or not secure.t

 Read Chapter 3 of the Sullivan text, Authenitcation.Primary topics:

  • Fundamentals
  • Authentication Models
  • Passwords

 

IT Governance paper

  

Scenario:

You have recently been hired as a Chief Information Governance Officer (CIGO) at a large company (You may choose your industry). This is a newly created position and department within the organization that was founded on the need to coordinate all areas of the business and to provide governance of the information. You will need to hire for all positions within your new department.

The company has been in business for more than 50 years and in this time has collected vast amounts of data. Much of this data has been stored in hard copy format in filing cabinets at an offsite location but in recent times, collected business data is in electronic format stored in file shares. Customer data is being stored in a relational database, but the lack of administration has caused data integrity issues such as duplication. There are currently no policies in place to address the handling of data, business or customer. The company also desires to leverage the marketing power of social media, but has no knowledge of the types of policies or legal issues they would need to consider. You will also need to propose relevant metrics that should be collected to ensure that the information governance program is effective.

The CEO and Board of Directors have tasked you to develop a proposal (paper) that will give them the knowledge needed to make informed decisions on an enterprise-wide Information Governance program, addressing (at a minimum) all of these issues, for the company. 

Requirements:

The paper should include at a minimum of the following sections:

a. Title page

b. Executive Summary (Abstract)

c. Body

i. Introduction (including industry discussion – 1-2 pages)

ii. Annotated Bibliography (2-3 pages)

iii. Literature review (2-3 pages)

iv. Program and technology recommendations, including:

1. Metrics

2. Data that matters to the executives in that industry, the roles for those executives, and some methods for getting this data into their hands.

3. Regulatory, security, and privacy compliance expectations for your company

4. Email and social media strategy

5. Cloud Computing strategy

d. Conclusion

e. References

2. You must include at least two figures or tables. These must be of your own creation. Do not copy from other sources.

3. Must cite at least 10 references and 5 must be from peer reviewed scholarly journals (accessible from the UC Library).

4. This paper should be in proper APA format and avoid plagiarism when paraphrasing content. It should be a minimum of 8 pages in length (double-spaced), excluding the title page and references.

Python programming

I need help to write this following code in python.

1. DynamicEntity (class) – Inherits from Entity
DynamicEntity is an abstract class which provides base functionality for special types of Entities that are dynamic (e.g. can move from their original position).

set_position(self, new_position: tuple[int, int]) -> None

Updates the DynamicEntity’s position to new_position, assuming it is a valid position.

Examples
>>> dynamic_entity = DynamicEntity((1, 1))
>>> dynamic_entity.get_position()
(1, 1)
>>> dynamic_entity.set_position((2, 3))
>>> dynamic_entity.get_position()
(2, 3)
>>> dynamic_entity.get_id()
‘DE’
>>> str(dynamic_entity)
‘DE’
>>> dynamic_entity
DynamicEntity((2, 3))

2. Item – Inherits from Entity
Subclass of Entity which provides base functionality for all items in the game.
apply(self, player: Player) -> None
Applies the items effect, if any, to the given player.

Examples
>>> player = Player((2, 3))
>>> item = Item((4, 5))
>>> item.apply(player)
Traceback (most recent call last):
…
NotImplementedError
>>> item.get_position()
(4, 5)
>>> item.get_name()
‘Item’
>>> item.get_id()
‘I’
>>> str(item)
‘I’
>>> item
Item((4, 5))

The Entity class example

Examples
>>> entity = Entity((2, 3))
>>> entity.get_position()
(2, 3)
>>> entity.get_name()
‘Entity’
>>> entity.get_id()
‘E’
>>> str(entity)
‘E’
>>> entity
Entity((2, 3))

Problem 9- Org Behavior

1. Discuss deviant workplace behavior? How is deviant workplace behavior influenced by the group to which the individual belongs?

Text-

Title: Essentials of Organizational Behavior, Student Value Edition 

ISBN: ISBN-13: 9780135468890 

Authors: Stephen P. Robbins, Timothy A. Judge 

Publisher: Pearson 

Edition: 15TH

3 Separate Individuals Problems

Save in Word Document

Watch the 2 YOUTUBE videos and answer the questions below:

SEE LINK: https://youtu.be/mLGt_GPyPFU

SEE LINK: https://youtu.be/WxQXvmnfCaw

Answer the following questions:

1-What is Walmart’s e-commerce strategy?

2-Why did Walmart acquire Jet.com?

3-How does Walmart’s fulfllment operation difer from Amazon’s?

4-What are the three key assets that Walmart can leverage (build on) to compete with
Amazon and other online retailers?

————————————————————————–

Save in Word Document

Customer Service Chapter 7

1. Define the term ROI.

2. What is business and IT alignment?

3. What is a cost-benefit analysis?

4. Describe two ways that customer data is used.

5. Describe two ways that incident data is used.

6. Describe two ways that status data is used.

7. What is scope creep?

8. Define the term trend analysis.

9. What is a budget?

10. Define the term cost per contact.

———————————————————————–

Save in Word Document

Customer Service Chapter 8

1. What is a team?

2. What are the reasons technical support lends itself to a team setting?

3. What are the five characteristics of a successful team?

4. List the three components of a service desk mission.

5. List and describe three ways the service desk supports the goals of DevOps.

6. List the four stages of development reflected in the Tuckman Teamwork Model.

7. List three characteristics of emotional intelligence.

8. Why is communication important in a team setting?

9. What is feedback?

10. How must feedback be delivered to be effective?

Lab exercise

   

Payroll Lab

You will be taking in a file (payroll.txt) which details a number of departments (at least 1) and in each department are a set of employees (each department will have at least 1 employee or it would not appear on the payroll sheet). Your job is to read the file in separate out each employee and calculate the total values (hours, salary, number of employees) for each department and in each category (F1, F2, F3, F4). In your final submission please include the .cpp file which should work for any kind of payroll file I supply (which will naturally match the format of the examples below). Be sure to indicate in your submission text if you have attempted any of the bonus points .

   

An example file:

The IT Department
Bill 8 7 8 9 7 F1
Bob 205103 0.08 F3
Betty 8 8 7 8 8 F2
Brandon 10 10 9 6 9 F2
Brad 9 8 10 9 9 4 1 F4

The Sales Department
Kyle 88840 0.105 F3
Tyler 105203 0.085 F3
Konner 8 6 7 6 9 F2
Sam 309011 0.045 F3
Kent 9 8 9 9 9 0 0 F4
EOF

An additional example file:

The Sales Department
Mike 5 6 1 3 5 F1
Mark 98103 0.115 F3
Jill 8 8 8 8 8 F2

Frank 106101 0.095 F3

Mark 76881 0.091 F3

Department of Records
Konner 8 6 7 6 9 F2
Tammy 7 3 7 2 8 F1

Anika 8 8 8 8 8 F2

Marta 1 0 0 5 2 F1
Kent 9 8 9 9 9 0 0 F4
EOF

   

Last in the row after the hours comes the pay grade (F1, F2, F3, F4). The number of hours recorded is based on the pay grade of the employee. F1 and F2s will have 5 numbers for their hours. F3s are commission based where a sales amount and a commission percentage is given. F3s are also assumed to work 30 hours if their commission is 10% or below and 40 hours if their commission is above 10%. F4s will have 7 numbers (as they are on-call during the weekend). Each of the pay grades will also have different pay calculations which are as follows:

F1 = The total number of hours * 11.25
F2 = (The total number of hours – 35) * 18.95 + 400
F3 = The total sales amount * the commission rate
F4 = The first 5 hourly totals * 22.55 + Any weekend hourly totals (the last 2) * 48.75

Your output to the screen should start with the department name, followed by the total pay for all of the employees, then the total number of hours, and the total number of employees. After that you should have a breakdown of each category of employee: F1 total pay and total hours, F2 total pay and total hours…

Each department will have at least 1 employee and each department will contain the word “Department.”

The IT Department
Total Salary: $##.##
Total Hours: ###
Total Number of Employees: ##
Roster: Bill, Bob, Betty, Brandon, Brad 

   

F1:
Total Salary: $##.##
Total Hours: ###
Total Number of Employees: ##

F2:
Total Salary: $##.##
Total Hours: ###
Total Number of Employees: ##

F3:
Total Salary: $##.##
Total Hours: ###
Total Number of Employees: ##

F4:
Total Salary: $##.##
Total Hours: ###
Total Number of Employees: ##

   

The Sales Department
Total Salary: $##.##
Total Hours: ###
Total Number of Employees: ##
Roster: Kyle, Tyler, Konner, Sam, Kent

   

F1:
Total Salary: $##.##
Total Hours: ###
Total Number of Employees: ##

F2:
Total Salary: $##.##
Total Hours: ###
Total Number of Employees: ##

F3:
Total Salary: $##.##
Total Hours: ###
Total Number of Employees: ##

F4:
Total Salary: $##.##
Total Hours: ###
Total Number of Employees: ##

   

Before coding your solution, take the time to design the program. What are the possible things that the file can have that you need to anticipate? What are the actions that you need to take (read the file, add up hours…)? Are those actions things that could be placed in separate functions? What about the function – can you guess some of the things that will happen? Such as, using substring to pull out part of a line in the file maybe using stoi to convert a string to an integer to add it to the total or creating variables to hold the employee type you find before passing it to another function. Finally, how are these functions called, what is the order and what information is passed to and from? 

Scoring Breakdown

25% program compiles and runs
30% program reads in and calculates the figures for output
10% the program is appropriately commented
35% outputs the correct information in a clear format 

5% bonus to those who can output the F# responses in a columned output like that shown above.

5% order the employees in the roster according to their F status, F1’s first, then F2’s and so on.
5% bonus to those who do a chart comparing the data at the end to show the relation between the pay grades and the amount of salary spent in each (they style of chart is up to you and more points may be given for more difficult charts (like a line chart):

   

B Department
F1 – 00000000
F2 – 000000
F3 – 00000
F4 – 000000000000 

K Department
F1 – 0
F2 – 0000
F3 – 0000000000
F4 – 0000000 

  

Or event something like this instead:

0
0 0
0 0 0
0 0 0 0
0 0 0 0
F1 F2 F3 F4