For attached KFC organization (), Conduct SWOT analysis and discuss the components (Strengths, Weaknesses,Opportunities,Threats)
For this assignment need below:
Abstract (75-100 words): on a separate page
Introduction: 1 page
Overview of the organization:2+ page
* Identify the type of business organization and strategies
* Key players
* Competitors
* Organizational Structure
* Organizational Strategy (low cost; differentiation; etc.)
Review and analysis the provided Incident Response Plan in comparison to what you have read in the Incident Response Planning section of this week’s reading.
Prepare a 350- to 1,050-word paper that fully discusses the topic questions
Format your paper consistent with APA guidelines. Format your paper consistent with APA guidelines.
Question: Assume that you have been tasked by your employer to develop an incident response plan. Create a list of stakeholders for the IR planning committee. For each type of stakeholder, provide the reasons for inclusion and the unique aspects or vision that you believe each of these stakeholders will bring to the committee.
– 350 words
– References
– No plagiarism
– APA7 Format
Hide Assignment InformationInstructions
For this project, you will apply the CompTIA 6-Step Troubleshooting Process to explain how you would tackle Hudson Fisher Associates Help Desk Tickets. There are three groups of tickets, Level 1, Level 2, and Level 3. You will pick two tickets from each group.
As you prepare to analyze and hopefully solve these typical IT help desk tickets, keep in mind that for this course, it is more about the process and less about finding the “correct” answer. You may not always find an exact answer from the information given. The problems are structured to approximate what you will find in the workplace. Use a logical and repeatable process (e.g., the CompTIA 6-Step Troubleshooting Process) and eliminate the improbable as you work your way through each scenario.
CompTIA 6-Step Troubleshooting Process:
How Will My Work Be Evaluated?
As you progress in your information technology and cybersecurity career, you may find yourself making presentations to customers, client audiences, and management. For this assignment, you should articulate your findings from the six support cases.
But the challenge you face is in expressing a technical solution to a nontechnical audience. Avoid jargon and acronyms. Find a way to relay your solution (and challenges) in language that your audience will find easily relatable.
Communicating in this manner will not always be easy. You may struggle to find the right analogy or metaphor. But if you can master the skill of summarizing your results and recommendations to management in an effective presentation, you will demonstrate how you use your technical knowledge to convey your ideas to others in a professional setting. You will also earn the respect and trust of your peers, your supervisor, and upper management as an effective communicator. You will be viewed as an employee ready for advancement.
The following evaluation criteria aligned to the competencies will be used to grade your assignment:
Your deliverable for the project is an annotated PowerPoint Presentation covering the following:
NO plagiarism******
SC_EX365_2021_CS1-3b_FirstLastName_1
· Open the file SC_EX365_2021_CS1-3b_FirstLastName_1.xlsx, available for download.
· Save the file SC_EX365_2021_CS1-3b_FirstLastName_1.xlsx as SC_EX365_2021_CS1-3b_FirstLastName_2.xlsx
o Edit the file name by changing “1” to “2”.
o If you do not see the .xlsx file extension, do not type it. The file extension will be added for you automatically.
· With the file SC_EX365_2021_CS1-3b_FirstLastName_2.xlsx open, ensure that your first and last name is displayed in cell B6 of the Documentation worksheet.
o If cell B6 does not display your name, delete the file and download a new copy.
1. Liang Bandy is a senior project manager at Forward Construction, a firm that works on construction projects for business and commercial buildings. Liang has created a workbook summarizing the Office Plaza Construction project for the Meadowood Office Center. She asks for your help in completing the workbook.
Go to the Budget worksheet. Unfreeze the panes since Liang does not need to display those rows as she scrolls the worksheet.
2. In cell K2, enter a formula using the NOW function to display today’s date. Apply the Short Date number format to display only the date in the cell.
3. Format the worksheet title as follows to use a consistent design throughout the workbook:
a. Fill cell C2 with the Teal, Accent 6, Lighter 40% shading color.
b. Change the font color to White, Background 1.
c. Merge and center the contents of cell C2 across the range C2:I2.
d. Use AutoFit to resize row 2 to its best fit.
4. Format the hourly rate data as follows to suit the design of the worksheet and make the data easier to understand:
a. Italicize the contents of cell L2 to match the formatting in cell J2.
b. Apply the Currency number format to cell M2 to clarify that it contains a dollar amount.
5. Format the data in cell B4 as follows to display all of the text:
a. Merge the cells in the range B4:B14.
b. Rotate the text up in the merged cell so that the text reads from bottom to top.
c. Middle-align and center the text.
d. Remove the border from the merged cell.
e. Resize column B to a width of 6.00.
6. Format the data in row 4 as follows to show that it contains column headings:
a. Change “Description” to use Code Description as the complete column heading.
b. Apply the Accent 6 cell style to the range C4:I4.
c. Use AutoFit to resize column E to its best fit.
7. In column F, Liang wants to include the actual dollar amount of the work completed. Enter this information as follows:
a. In cell F5, enter a formula without using a function that multiplies the completed hours (cell E5) by the hourly rate (cell M2) to determine the dollar amount charged for blueprint drafting. Include an absolute reference to cell M2 in the formula.
b. Use the Fill Handle to fill the range F6:F14 with the formula in cell F5 to include the charges for the other work.
c. Format the range F6:F14 using the Comma Style format and no decimal places to match the formatting in column G.
8. Liang needs to show how much of the estimate remains after the completed work. Provide this information as follows:
a. In cell H5, enter a formula without using a function that subtracts the completed amount billed (cell F5) from the estimated amount (cell G5) to determine the remaining amount of the estimate for blueprint drafting.
b. Use the Fill Handle to fill the range H6:H14 with the formula in cell H5 to include the remaining amount for the other work.
c. Format the range H6:H14 using the Comma Style format and no decimal places to match the formatting in column G.
9. Liang also wants to show the remaining amount as a percentage of the completed amount. Enter this information as follows:
a. In cell I5, enter a formula that divides the remaining dollar amount (cell H5) by the estimated dollar amount (cell G5).
b. Copy the formula in cell I5 to the range I6:I15, pasting only the formula and number formatting to display the remaining amount as a percentage of the actual amount for the other work and the total.
10. Calculate the totals as follows:
a. In cell E15, enter a formula using the SUM function to total the actual hours (range E5:E14).
b. Use the Fill Handle to fill the range F15:H15 with the formula in cell E15.
c. Apply the Accounting number format with no decimal places to the range F15:H15.
11. Liang also wants to identify the work for which Forward Construction has billed more than the full estimate amount.
In the range I5:I14, use conditional formatting Highlight Cells rules to format values less than 1% (0.01) in Light Red Fill with Dark Red Text.
12. Liang imported data about the project team working on the Office Plaza Construction project and stored the data on a separate worksheet, but wants to include the data in the Budget worksheet. Copy and paste the data as follows:
a. Go to the Project Team worksheet and copy the data in the range B2:G13.
b. Return to the Budget worksheet. Paste the data in cell K3, keeping the source formatting when you paste it.
13. Liang needs to list the position for each team member. Those with five or more years of experience have a Senior position. Otherwise, they have Support position. List this information as follows:
a. In cell O5 on the Budget worksheet, enter a formula that uses the IF function to test whether the number of years of experience (cell N5) is greater than or equal to 5.
b. If the team member has five or more years of experience, display “Senior” in cell O5.
c. If the team member has less than five years of experience, display “Support” in cell O5.
d. Copy the formula in cell O5 to the range O6:O14, pasting the formula only.
e. Use AutoFit to resize column O to its best fit.
14. Liang wants to include summary statistics about the project and the team members. Include this information as follows:
In cell E17, enter a formula that uses the AVERAGE function to average the number of years of experience (range N5:N14).
15. Make the Line chart in the range C19:I33 easier to interpret as follows:
a. Change the chart type to a Clustered Column chart.
b. Enter Task Progress as the chart title.
c. Add a primary vertical axis title to the chart, entering Hours as the axis title text.
d. Add data labels to the Outside End of each column.
16. Delete row 35 since Liang has adjusted the chart.
17. Go to the Schedule worksheet. Rename the Schedule worksheet tab to Work Schedule to use a more descriptive name.
18. Each type of work starts on a different date because the types depend on each other. Enter the starting dates for the remaining work as follows:
a. In cell D6, enter a formula without using a function that adds 1 day to the value in cell C6.
b. In cell E6, enter a formula without using a function that adds 2 days from the value in cell C6.
c. In cell F6, enter a formula without using a function that adds 3 days to the value in cell C6.
d. In cell G6, enter a formula without using a function that adds 3 days to the value in cell C6.
[Mac Hint: The date will display in the format m/d/yy.]
19. Copy the formulas for inspections to the rest of the schedule as follows:
a. Copy the formula in cell D6 to the range D7:D8.
b. Copy the formula in cell E6 to the range E7:E8.
c. Copy the formula in cell F6 to the range F7:F8.
d. Copy the formula in cell G6 to the range G7:G8.
20. In cell C9, enter a formula that uses the MIN function to find the earliest date in the project schedule (range C6:G8).
21. In cell C10, enter a formula that uses the MAX function to find the latest date in the project schedule (range C6:G8).
Excel_Comprehensive_Capstone2_Summer_Revenue
This Solution is especially For Rincon
You are a security professional for a large, private health care organization. Users have access to file and application servers, as well as data storage facilities that contain customer health information and personally identifiable information (PII). Your organization needs to create user access policies and provide them to its employees.Sean, your manager, asks you to write a report detailing relevant user access policies. He needs you to research a generic template and use that as a starting point from which to move forward.For this assignment:
Sean, your manager, asks you to write a report detailing relevant user access policies. He needs you to research a generic template and use that as a starting point from which to move forward.
For this assignment:
