All posts by : chebby

Please go through the question completely before providing the answer

Finished the homework attached to this file total of 8 questions. 

APA format, reference include if needed.

Please be on time

Due date: This Saturday 06/05

 This assignment will be submitted to Turnitin™.Instructions

Assignment Instructions:

• Congratulations, you have been chosen to build out a network for a new facility for your company, ACME, Inc.
• Office Schematic, (select 

(Picture of office will be in uploaded files)

  * ) each office is approximately a 10’x10′ space with 10′ ceilings. Building is roughly 125’x150′.

• Each office should contain two network ports minimum, one for Voice and one for Data. Room B will serve as your network closet.
• You will need to provide the following items in your submission:
  • Estimated Purchases list (some examples below)
    • Switches
    • Cable
    • Port plates
    • Punch Boards
    • UPS and Power
    • Etc.
  • A timeline of installation (*estimated)
  • Chosen Typology (*estimated)
  • Basic Network configuration (*estimated)
  • Remember to justify your choices
  • Your proposal should answer the questions above. If you have experience in networking, there are additional things you would “want”, but hold on those till later assignments, as the assignments build upon one another. *NOTE* This means you may reuse information from this assignment in future assignments as well, and I am granting you a waiver of not citing yourself in those assignments.
• Assignment must be in a Word document. The numbers are going to be rough estimates, that is understood. Pricing for purchases and labor can be based off of pricing from online resources.
• Required Format
• A timeline of installation (*estimated) ANSWER
• Chosen Typology (*estimated) ANSWER
• Basic Network configuration (*estimated) ANSWER
• Remember to justify your choices

Topic of your choice within Information Assurance during this course.  The final project consists of 3 files:

• The main research paper      about 4-5 pages, including a cover page and this must be a Word document.
• bibliography of The reference, at least      three references and in APA format. This must be a Word document. 
• The presentation slides      with highlights and details of your project. This must be a PPT or PDF document.

  APA format and no plagiarism

Compose a Cultural Orientation Paper. Using concepts from Schein (Chapters 1–2) and Bolman and Deal (Chapter 1), write a five- to six-page paper that describes the culture of your current organization (or an organization which you have been a part of in the past).

While this paper should be academic in nature (using properly-cited quotations and paraphrases throughout), assume that your instructor is about to join the organization! With that in mind, write it as a “cultural orientation letter” to him or her that addresses, at very least, the following:

a.    Explain the organizational culture in detail using Schein’s three levels of culture (approximately two pages).

b.    Which of Bolman and Deal’s four frames (see page 20) best describe your culture? Why? Which culture is primary and why is it primary? Which is secondary and why is it secondary? (This should be approximately one page.)

c.    What aspects of the organizational culture do you appreciate and why (approximately half a page)?

d.    What aspects of the organizational culture do you not appreciate and why (approximately half a page)?

e.    If a new manager (whether mid- or senior-level) were to survive and thrive within your organizational culture, list a variety of dos and don’ts that he or she should follow (approximately one page).

Include a title page, an abstract, section titles, a title page, and a references page—all in APA format.

 When thinking about data visualization, it is important to understand regular expressions in data analytics.  Therefore, note the importance of data visualizations and choose two types of expressions (* – wildcards for example) and discuss the difference between the two types of expressions. 

Lab #09 Flowchart
Many websites ask for phone numbers. The problem is that there are many different ways to represent a phone number. Examples include 817-555-1234, 817 555 1234 (c), and (817) 555-1234 x23. Write a Raptor program which inputs a string containing a phone number in any format and outputs it in the standard format. For this assignment, the standard format is (817) 555-1234.
Your Raptor program should:
1. Input a string including the number
2. Copy only the digits from the input string into another string
3. Issue an error message if the input string does not contain at least 10 digits
4. If the input string contains more than 10 digits, include only the first 10 digits in the formatted number
5. Output the phone number in standard format
Notes:
1. In Raptor, a string is just an array of characters.
2. Lesson #9 has an example of working with strings in Raptor.
3. When only digits are input, Raptor assumes it is an integer instead of a string. Your flowchart does not need to properly handle an input like 8175551234, but your C++ version does need to handle that.
4. I recommend passing the digits only string to a procedure which outputs it in the standard format.
Sample Output (inputs in bold)
Please enter a phone number: 817-555-1234
The properly formatted number is (817) 555-1234
Please enter a phone number: (817)515 7259 x23
The properly formatted number is (817) 515-7259
Please enter a phone number: 214-555-999
The phone number must have at least 10 digits
Please enter a phone number: 800**4444xxx333
The properly formatted number is (800) 444-4333

Lab #09 C++ 

using the flowchart for Lab #09 as a guide, write a C++ program that also inputs a phone number and displays it in the standard format, (817) 555-1234. Your program may use either C-Strings or the C++ string Class, but should not mix them. Chapter 10 has examples using both kinds of strings. 

Test your program to make sure it works properly, and then upload just the .cpp file. 

Research 5 obscure IoT devices.

Explain what the purpose of this device is.

Describe the advantages of these devices being connected to the network.

Describe the possible security risks of having these devices on your network.

 You are starting a new company and want to ensure organizational success through operational efficiency and strategic vision.  The plan for this project is to understand where there is a need in the market to create a new product/ service, understand the components that need to be addressed or factored when managing operational efficiencies (to include resource management), and present the work as though asking for approval to proceed with the project. 

 Your task is to determine where there is a gap in the market or area for a niche market can note:

1. The market, the name of the company, why you feel as though there is a niche or area for you to succeed in the market.
2. Research other companies in the same market and note why they aren’t providing the services you are offering and contrast them to the goods or services your company is going to offer.

 Discuss the major components required in the operational efficiency plan:

• Business Plan
  • How will you obtain funds for the project?  (are you asking for funds or obtaining from another source)
  • How many funds are required to start?
  • What is the timeframe to launch?
  • Resource requirements
    • Hardware
    • Software
    • Other support IT to get the systems up and running (networking, database, etc…)
    • People
    • Equipment
    • Office Space
    • Etc…
• Key concepts to address to ensure the organization is running efficiently
  • Organizational Learning Concepts and Theories
  • Integration of IT Resources
  • Virtual Teams? Local Teams?  Why?
  • Ethical and Legal Implications
  • Cyber Security and Privacy of Information
    • What do you have to account for?  (managing data or credit card information?)
  • Best Practices that you are going to implement in your organization and why
• Summary and Next Steps

 The above paper must be at least 10 pages in length.  This does not include the APA formatted cover page or the references.  There must be at least 6 APA references to support the findings in the submission. 

I want every task with out the copy of the previous one’s