1. Please fill out this form (also available in this week’s folder) to compare and contrast your three research articles (do not include your news article). 

2. Please write part 2 of your literature review. You will be essentially cutting and pasting your three objective summaries under Level II headings (see p 13 in your manuals)

Put them in an order that makes sense given how you compared and contrasted them.

Use your transition compare and contrast words (similiar to…etc) !!! 

Project Background

Throughout this course, you will be working on several aspects of a software development project that will result in a complete Software Development Plan document for a project of your choosing. You will not actually be developing any software, but you will work extensively with the concepts of good software development practices. Additional information and the deliverables for each Individual Project assignment will be provided in the assignment description for the project.

Project Selection

The first step will be to select a project as the target for your software development plan. This project will be used as the basis for each of the assignments throughout the course and should conform to the following guidelines:

• Nontrivial: The selected project should be large enough to allow reasonable exercise of the software development planning process.
• Domain knowledge: You should be familiar with the organization or software category to allow focus on the planning tasks without significant time required for domain education.
• Accessibility: You should have good access to the people and other information related to the organization or software because this will be an important part of the planning process.

Select a software development project that fits these requirements, and submit your proposal to your instructor before proceeding further with the assignments in the course. Approval should be sought within the first several days of the course. Your instructor will tell you how to submit this proposal and what notification will be given for project approval.

Assignment Details

For the assignments in this course, you will not be implementing the actual software project—rather, you will be developing a comprehensive Software Development Plan document. Your first task in this process will be to select a project to use as the basis of your design. You will also create the shell document for the final project deliverable that you will be working on during each unit. As you proceed through each project phase, you will add content to each section of the final document to gradually complete the final project delivery.

The project requires that you do the following:

• Submit the project proposal to your instructor for approval.
• Software Development Plan document shell
  • Use Word
  • Title Page
    • Course number and name
    • Project name
    • Student name
    • Date
  • Table of Contents
    • Use autogenerated TOC
    • Should be a separate page
    • Maximum of 3 levels deep
    • Be sure to update the fields of the TOC so it is up-to-date before submitting your project.
  • Section Headings (Create each heading on a new page with “TBD” as the content except for the sections listed under New Content below.)
    • Project Outline
    • Planning
    • Analysis
    • Design
    • Quality Assurance
    • Implementation
    • Maintenance
• New Content
  • Project Outline
    • Briefly describe the project.
    • Include a list of the major goals and constraints for the project.
    • Material can be taken from the approved proposal submitted to your instructor.
    • Be sure this project is approved by the instructor.
  • Planning
    • Identify the stakeholders for the project.
    • Identify the tools required for the project and how they will be used. Tools for systems analysis may include CASE tools, financial analysis tools, project management tools, and Internet resource tools such as groupware and collaboration tools. Be sure to address the following in your tool discussion:
      • Describe the primary features, strengths, and weaknesses.
      • Identify the area(s) of the SDLC and the tasks for which the tools would be useful.
      • Discuss how the use of tools would improve the associated area (or phase) of SDLC. 
    • Identify the software development life cycle model that will be used for the project, including justification of the selection.
    • Identify the major phases of the project, and illustrate how they fit in the selected development model.
• Name the document “yourname_ITSD422_U1Submission.doc.”
• Submit the document for grading.

-Read Wells Fargo Banking Scandal and complete the questions at the end of the case study ( https://www.scu.edu/ethics/focus-areas/business-ethics/resources/wells-fargo-banking-scandal/)

– The answers should be a minimum of two pages with two references attached for each. There should be no plagiarism- attach a plagiarism report with 0% similarity index

I recently purchased a new Cisco CISCO881-SEC-K9 (https://www.allhdd.com/cisco-881-sec-k9-cisco-4-port-router/ ) I am struggling to setup it up. Please help me in setting it up.

Explain how cookies can show that a user has visited a site if that user’s history has been deleted.

Optional: install Windows Historian and see the sites visited by a particular user. 

Please check the work and message if it is possible 

Please read and follow the lab and answer all these questions (Highlighted in yellow).

How technology effects out lives.

After you have reviewed the Assignment Details below, click the Discussion Board link under the My Work heading above to open the Discussion Board and make your post.

Reflect on what you learned this week and the coursework you were assigned. Answer the following questions:

1. What did you find the most challenging and how did you overcome that challenge?
2. What did you find the most interesting and how can you use what you learned in your degree program and future career?

In your own words, post a response to the Discussion Board, and comment on at least 2 other postings. You will be graded on both level of engagement and the quality of the contribution to the discussion.

Excel_2G_Condiments_Inventory

#Excel_2G_Condiments_Inventory

Project Description:

#In the following project, you will edit a worksheet that summarizes  the inventory of Condiments and Toppings at the Valley View facility 

#Open   the Excel workbook Student_Excel_2G_Condiments_Inventory.xlsx   downloaded with   this project.

#Change the Theme to Ion. Rename   Sheet1 as Condiments and Sheet2 as Toppings. Click the Condiments sheet tab   to make it the active sheet.
 

  #If the theme is not available, click Browse for Themes, navigate  to the files   you downloaded with this project, and then select Ion.thmx.

#To the right of column B, insert   two new columns to create new  blank columns C and D. By using Flash Fill in   the two new columns,  split the data in column B into a column for Item # in   column C and  Category in column D. Type Item # as the column title in column C and Category as the column title in column   D. Delete column B. Cut column C, Category,   and paste it to column G. Delete the empty column C.  

#Display the Toppings worksheet,   and then repeat Step 3 on this worksheet.

#Without grouping the sheets,   make the following calculations in both worksheets:
   • In cell B4, enter a function to sum the Quantity in Stock data, and  then   apply Comma Style with zero decimal places to the result.
   • In cells B5:B8, enter formulas to calculate the Average, Median,  Lowest,   and Highest retail prices, and then apply the Accounting  Number Format.

#Without grouping the sheets,   make the following calculations in both worksheets:
   • In cell B10, enter a COUNTIF function to determine how many different types   of Relish are in stock on the Condiments   sheet and how many different types of Salsa are in stock on the Toppings worksheet.
 

#Without grouping the sheets,   make the following calculations in both worksheets:
   • In cell G14 type Stock Level.
   • In cell G15, enter an IF function to determine the items that must be   ordered. If the Quantity in Stock is less than 75, the Value_if_true is Order. Otherwise, the Value_if_false is OK. Fill the formula down through   all the rows.

#Without grouping the sheets,   apply the following formatting in both worksheets:
   • Apply Conditional Formatting to the Stock Level column so that Text that   Contains the text Order  are formatted with Bold Italic, a Font Color using in the fifth    column, the first color, and a Fill color set to No Color. Apply  Gradient   Fill Red Data Bars to the Quantity in Stock column.
 

#In the Condiments sheet, format   the range A14:G42 as a table with  headers and apply Sky Blue, Table Style   Light 20. If the table style  is not available, choose a similar style. Insert   a Total Row, filter  by Category for Relish, and then Sum the Quantity in   Stock column.  Record the result in cell B11.

#Clear the filter from the table.   Sort the table on the Item #  column from Smallest to Largest, and then remove   the Total Row. On the  Page Layout tab, set Print Titles so that row 14   repeats at the top  of each page.

In the Toppings sheet, format   the range A14:G42 as a table with  headers and apply Light Green, Table Style   Light 19. If the table  style is not available, choose a similar style. Insert   a Total Row,  filter by Category for Salsa, and then Sum the Quantity in Stock    column. Record the result in cell B11.

#Clear the filter from the table.   Sort the table on the Item #  column from Smallest to Largest, and then remove   the Total Row. On the  Page Layout tab, set Print Titles so that row 14   repeats at the top  of each page, and then save your workbook.

#Group the two worksheets. Merge   and center the title in cell A1  across the range A1:G1 and apply the Title   cell style. Merge and  center the subtitle in cell A2 across the range A2:G2   and apply the  Heading 1 cell style. AutoFit Columns A:G. Center the   worksheets  Horizontally, and then change the Orientation to Landscape.

#Save your workbook and then   ungroup the sheets. Click the Toppings  sheet tab, and then insert a new   worksheet. Change the sheet name to Summary and then widen columns A:D to 170 pixels.   Move the Summary sheet so that it is the first sheet in the workbook.

#In cell A1, type Valley View   Inventory Summary.   Merge & Center the title across the range A1:D1, and then apply the Title   cell style. In cell A2, type As of June 30 and then Merge & Center the text across the   range A2:D2. Apply the Heading 1 cell style.

#On the Condiments sheet, copy   the range A4:A8. Display the Summary  sheet and Paste the selection to cell   A5. Apply the Heading 4 cell  style to the selection.

#In the Summary sheet, in cell   B4, type Condiments. In cell C4, type Toppings. In cell D4, type Condiments/Toppings. Center the column titles, and   then apply the Heading 3 cell style.

#In cell B5, enter a formula that   references cell B4 in the  Condiments sheet so that the Condiments Total Items   in Stock displays  in B5. Create similar formulas to enter the Average Price,   Median  Price, Lowest Price, and Highest Price from the Condiments sheet into    the Summary sheet in the range B6:B9.

#Enter formulas in the range   C5:C9 that reference the Total Items  in Stock and the Average Price, Median   Price, Lowest Price, and  Highest Price cells in the Toppings worksheet.

#In the range D5:D9 of the   Summary sheet, insert Column sparklines  using the values in the Condiments   and Toppings columns (insert in  each cell individually). Format the   sparklines using the first five  styles in the first row in their given order.   To apply the Sparkline  style, on the Design tab, in the Style group, click   More, and apply  the first five styles in the first row.
 

#To the range B5:C5, apply Comma   Style with zero decimal places,  and confirm that the Accounting Number Format   is applied to the range  B6:C9. Center the Summary worksheet Horizontally and   change the  Orientation to Landscape. Insert a custom footer in the left   section  with the file name.